Vise Rapid Cure Ball Plug
(Kit of 4 quarts of "A" and 4 quarts of "B")
Vise Rapid Cure is a fast setting ball plug that actually cures clear (if no color pigment is used to influence the plug's color).
A few drops
from any of the colors in Vise's Color Kit is all that is needed to
help you achieve color-matching. Since Vise Rapid Cure cures to "clear" the is virtually no learning cure associated with "spot-on" color matches.
Rapid Cure is a 2 gallon kit that is packaged in 4 quart-sized bottles of
"A" and 4 quart-sized bottles of "B." This greatly increases the useful
life on unused product because your "shelf-life" meter doesn't start
ticking until the bottle's seal has been broken. We have exchanged the
pumps for "Yorker Tops" that also enhances shelf life and product
quality. Pumps dispense fluids on the down-stroke and bring in outside
air on the up-stroke. That outside air also contains any humidity
(moisture) that is present in the air and as all of us who have time in
the pro shop know: urethane and humidity are not friends.
Anytime
you have had an issue with "foamy" ball plug, it is because moisture as
been introduced into the bottle. This is why we removed the pumps and
stress the importance of keeping the lids on the "Yorker Tops" securely
in place when you are not dispensing ball plug into a mixing cup. Rapid cure is packaged under controlled conditions to insure that no
moisture is present in the bottle when we seal it.
If
you somehow allow moisture to gain access into either part "A" or "B",
you will see the results in foamy plug jobs. Once this happens you
should simply toss the open bottles of "A" and "B" and open a new pair
of quarts. This is another reason why we chose to package Rapid cure in
quarts. If moisture contaminants the opened bottles, the most you sand
to loose is no more than a quart each of "A" and "B." When moisture is
permitted to infiltrate plug materials packaged in gallon bottles, you
could lose the entire 2 gallon kit.